529, calle Sanshan, distrito de Muping, ciudad de Yantai, provincia de Shandong, China 264100
CHD5110TWQ Road Pollutant Removal Vehicle is a new type of road surface environmental protection construction vehicle adapted by Yantai Haide Special Vehicle Company Limited from the chassis of QL1110ANMACY truck of Qingling Motors Co. It is mainly used for road deep cleaning and cleaning and sweeping operations.
CHD5110TWQ Road Pollutant Removal Vehicle is a new type of road surface environmental protection construction vehicle adapted by Yantai Haide Special Vehicle Company Limited from the chassis of QL1110ANMACY truck of Qingling Motors Co. It is mainly used for road deep cleaning and cleaning and sweeping operations.
Deep cleaning operation: can solve the current existing sanitation equipment can not effectively carry out the road slate, oil and other dirt removal problems, mainly used for road maintenance, biochemical treatment, rescue, haze haze, etc., its main is the drainage of asphalt pavement inside the dust, sand and other clogging debris cleanup and recycling of cleaned out debris, so as to ensure that the drainage of drainage pavement drainage function in line with design requirements. Requirements, so that the road surface is blocked drainage function can be restored, to achieve the purpose of road surface maintenance;
Cleaning and sweeping operation: in order to apply the road surface of the ordinary fast operation needs, the vehicle is also equipped with a right sweeping brush plate, in order to the road surface corners of the garbage for thorough sweeping and removal, sweeping function can be realized on the road surface of the fast sweeping operation, spraying dust to meet the vehicle in the hot summer on the dry air cooling and dust removal;
CHD5110TWQ Road Pollutant Removal Vehicle adopts front independent water tank, its effective volume is as high as 5.2m³; the effective volume of the garbage tank reaches 4.6m³, and the reasonable matching of the water tank and sewage tank realizes the reasonable matching of a box of water to meet a box of sewage.
The vehicle’s chassis walking with two operation modes, namely, low-speed hydrostatic walking and direct-drive high-speed operation: hydrostatic low-speed walking for the use of Germany’s Linde hydraulic drive components, stepless adjustment, to meet the vehicle’s high and low-speed operational needs. Direct-drive fast operation is to drive the vehicle to travel fast through the engine and gearbox to realize the vehicle’s fast and direct access between zones.
The main supporting parts of the vehicle are selected from internationally renowned high-quality suppliers to ensure the stability and reliability of the vehicle performance; one-key operation mode, making the operation more convenient and quick; deep decontamination operations to meet the most stringent testing requirements of the new national standard of grams of net, the vehicle can be widely used in urban areas to remove the main roads and squares, piers, and cleaning and sweeping operations.
In order to meet the vehicle decontamination operation of the low-speed walking needs, the chassis of the vehicle walking operations assembled with hydrostatic drive walking technology, to achieve the vehicle’s high torque ultra-low-speed walking needs. In order to realize the vehicle’s deep decontamination operation needs, low-speed travel for the use of automatic speed cruise control.
The vehicle is equipped with a side-mounted sweeping brush plate, which can meet the vehicle washing operation when the roadside corner garbage removal, the vehicle a variety of operational modes of multiple options: 1, the rear cleaning disk of the individual decontamination mode of operation, through the left and right side of the cleaning disk, can realize the vehicle’s left and right side of the operational needs; 2, the side-mounted sweeping brush plate and the rear cleaning disk, to achieve the vehicle roadside corner garbage sweeping and sweeping operations; 3, the rear of the spray dust reduction 3, rear spray dust reduction function, can be for the hot summer cooling dust; 4, hand-held high-pressure car wash spray gun can not only realize the vehicle’s own cleaning, but also can be used to remove the function of roadside advertising.
The vehicle’s water tank is equipped with a low water level alarm device to prevent damage to the pump due to lack of water, and the vehicle is fitted with a high water level floating alarm device at the upper rear of the garbage can to remind the operator to carry out sewage discharge in time when the sewage in the bin reaches the alarm level.
Fitted with an automatic rotating winch-type car wash unit, a high-pressure hand-held rinsing lance with a coil length of up to 20 meters in order to facilitate the cleaning of vehicle surfaces and the rinsing of small roadside advertisements, with a working pressure of up to 300 bar.
| Proyecto | Parámetro |
| Fabricante de chasis | Qingling Motors Co.,LTD. |
| modelo de gabinete | QL1110ANMACY |
| Manera de conducir | 4 × 2 |
| Distancia entre ejes | 4475mm |
| Modelo del motor | 4HK1-TCG60 |
| Potencia nominal del motor/Velocidad | 151kW |
| desplazamiento del motor | 5193ml |
| Estándar de desplazamiento | National Six |
| Masa en vacío | 9300kg |
| Masa total máxima | 10550kg |
| DimensiónLXWXH | 7840X2260X2845,2760mm |
| Velocidad máxima teórica | 110 km/h |
| Volumen del tanque de agua | 5.2m³ |
| Capacidad del contenedor de basura | 4.6m³ |
| Velocidad de operación | 0～10 km/h |
| Presión máxima de la bomba de agua de alta presión | 30MPa |
| Ángulo de descarga de la basura | ≥50° |
Nota: Por favor, consulte el anuncio del chasis para los datos relevantes del chasis en la tabla de parámetros técnicos.
