529，Sanshan Street, Muping District,Yantai City,Shandong Province, China 264100
CHD5050TWQ dirty removal truck is a new road working vehicle designed and developed by Yantai Haide Special Vehicle Co., LTD. It is mainly applied to the deep decontamination and cleaning of pavement, square, park and community.
Deep cleaning work:It means to remove the perennial compaction, oil pollution and other dirt on the road. The road is repeatedly cleaned by rotating high-pressure water flow, so as to effectively remove the deposited garbage in the gap of the road surface. It can also realize the removal and cleaning of dust, sediment and other blocked sundries inside the drainage asphalt pavement, and suction and recovery of the cleaned sundries and sewage, to ensure that the drainage function of the drainage road meets the design requirements, so that the drainage function of the road is blocked to recover, to achieve the purpose of road maintenance.
CHD5050TWQ Trash Remover adopts the pre-cleaning suction cup, the solution tank and the dustbin adopt the integral structure, the left and right sides of the dustbin and the bottom are designed with water tanks, as far as possible to increase the volume of the tank and the dustbin. The effective volume of the clean water tank is up to 1.5m³; The volume of the dustbin is 0.9m³. The reasonable matching between the clean water tank and the sewage tank realizes the best matching between one tank of water and one tank of sewage.
The Trash Remover provides strong power for the whole vehicle through the Cummins engine assembled in the middle of the frame. The piston motor is driven by the large displacement variable pump imported from Germany to realize the hydrostatic low speed walking mode of the whole vehicle, and the stepless adjustment operation is convenient. The high pressure water system is driven by the variable pump plunger motor through the coupling transmission parts to achieve the high speed driving work of the high pressure plunger pump; In order to meet the needs of different working conditions, the pump can be adjusted by different speed, in order to obtain the required working pressure and flow.
The main parts of the machine are selected from internationally renowned quality suppliers to ensure the stability and reliability of the vehicle performance; One-key operation mode, making the operation more convenient and fast; The deep – level decontamination operation can meet the strictest requirement of the new standard.
The machine adopts the world’s best quality Cummins engine to provide power for the whole vehicle. The rated power of the engine is 81kw with strong power and stable performance. Cummins engine is with national protection, which can eliminate customer worries.
Picture 1 Cummins engine
The trash remover is equipped with a large displacement walking variable pump and piston motor imported from Germany. Through adjusting stepless the displacement size of the variable pump, it can get the needed steady walking speed.
Picture 2 Germany Linde walking variable pump and piston motor
The trash remover is equipped with a flush suction sucker in front, and it can operate the retraction function of the cleaning dish in the driving room;
The vehicle has various operation modes to choose :
Picture 3 Working device in front
The high pressure piston pump adopted is imported from Italy .It make the performance stable and reliable. Through hydraulic drive and stepless adjustment, it can meet the pump’s working requirements of obtained different flow and pressure in different rotate speed. The maximum pressure can reach 300bar in the water system of the vehicle.
Picture 4 Italian high pressure piston pump
Note: Our company keeps the right of all changes to the products. The information provided in this technical specification can just for reference. The specific parameters and configurations are subject to the actual delivery.
The engine of this trash remover is equipped in the middle of the frame, and There are independent water tanks in the two sides of the frame respectively. The high-pressure water pump and the engine silencer are respectively assembled inside of water tank. The dustbin and cleaning water tank adopt the integral structure. The structure is: The water tank is set on both sides of the dustbin and the bottom in order to achieve the maximum utilization of the overall space; The dustbin adopts double hydraulic cylinder which can dump and lift to unload. The dustbin is equipped with front flush design to achieve the purpose of auxiliary unloading. The structure of back door adopts the double sealing structure, which can avoid the sewage omission caused by the back door sealing problem in the process of vehicle transportation after the ending of vehicle operation.
Low water level sensor is installed at the back of the side clear water tank. When the water level in the clear water tank is close to the first alarm water level, the indicator light installed on the display in the driver’s room will alarm in the way of “flash” and make a “flute” sound .They remind the operator to add water in time. If it does not attract the timely attention of the operator, and after the flash alarm will be reached the time when the water level is close to the second alarm level which can prevent the damage caused by water shortage , the control circuit of the high pressure water pump will automatically cut off, so that the pump stops running.
Picture 5 Low water level alarm device for cleaning water tank
In order to help the timely discharge of sewage during the high-pressure flushing operation of the vehicle (especially in the rain season), the vehicle is equipped with a high water level floating alarm device at the back of the upper part of the dumpster. When the sewage in the garbage bin reaches the alarm level, the floating device will automatically float with the rise of the water level, and when it reaches the set liquid level, the alarm device on the control panel inside the driving room will make a continuous “flashing” and “flute” alarm sound. This will remind the operator to discharge sewage in time.
Picture 6 Dustbin high water level alarm and flush device
The garbage bin of the vehicle not only has a simple tipping and unloading function, but also it is equipped with high pressure flushing device in the front of the garbage bin. That is, when the vehicle is discharging the garbage, The operator first open the back door and then lift the box, and finally open the high pressure flushing device assembled in the front of the dustbin to thoroughly wash the dustbin . In order to facilitate the operator to timely add water for the water tank, the water tank filler is set in the middle of the right side of the dustbin: When water needs to be added, the operator just connect the hydrant interface with the water connection filler through the fire belt to add water;
Picture 7 Clean water filler
One-key intelligent automatic control mode, that is, after the operation mode of the vehicle is selected, the control operation of the vehicle can be completed with one key operation, and the vehicle can directly enter the scheduled operation state. All the control switches are accessible to get. The operation is very convenient.
Picture 8 One-button automatic control
In order to facilitate the operator to observe the sewage level in the sewage tank in time, the car is equipped with a sewage observation mirror on the rear door of the dustbin, which is very convenient for the operator to observe and operate the sewage level in the tank.
Picture 9 sewage observation mirror on the rear door of the dustbin
The trash removal is equipped with not only ordinary vehicle operation required lighting fixtures, but also the top operation indication arrow. Through the form of continuous flashing indication ,it reminds the safety of the rear vehicle operation.
Picture 10 Rear indicating arrow light
A hand-held spray gun device with automatic coil function is assembled in the left middle of the vehicle, which is used for the removal of the vehicle body itself and the roadside advertisements. The coil length is up to 15 meters, and it can also be used to connect the hand-pushed rotary washing and hand-pushed fan spray rod device to realize the flushing operation of the sidewalk.
Picture 11
| Item | Parameters |
| Dimension | 4840*1500*2300 mm |
| Wheelbase | 1850 mm |
| Track (front / rear) | 1280/1320 |
| Front / rear suspension | 1940/1050 |
| GVW | 5200kg |
| Kerb mass | 3600kg |
| Engine model | Cummins QSB3.9-C110-30 |
| Rated power | 81kw/2200rpm |
| Max torque | 480Nm.1600 |
| Type | In line four cylinder four stroke |
| Working voltage | 24 V |
| Max speed | 30km/h |
| Cleaning width | ≥2m |
| Cleaning speed | 0～3km/h |
| Max cleaning capacity | 6000m2 /h |
| Left and right displacement dimension of suction port | 220mm |
| Rated flow of high-pressure water pump | 60L/min |
| High pressure water pump pressure | 30MPa |
| Clean water tank volume | 1.5m³ |
| Garbage container volume | 0.9m³ |
| Unloading mode of garbage container | Combination of container lifting and high-pressure flushing |
